How to get burnt oil off coated header????

Last time I was at the track for some reason my vacuum pump over flow tank sprayed oil all over my freshly coated fenderwell header. Any Idea on how to get it off. I tried brake clean with no success.

Mother's Mag Wheel Polish worked for me on small areas and may need several applications. I've heard that "Never Dull" works as well.

http://www.nevrdull.com/

Ill second the mothers suggestion. Works great

scotch brite pad and some house hold citrus degreaser.

Thanks guys! I hope I can get it off! I was freakin out at the track!!!!! Serves me right for trying to make stuff look respectable!!!!!

Had the same thing happen a couple of years ago. Bob George suggested oven cleaner to me and it worked.

I've had great luck just with a wet soapy sos pad.

PM Mike Hynes (THESHAKERPROJECT) and ask him what he used to clean up my coated TTIs for me. They were pretty bleepin' disgusting, and now they're waaaaay better looking.

Oven cleaner. Works like a charm and no elbow grease required.

X2, doesn't harm the coating like adrasives.

I used Wizard's metal renew on mine and the oil wiped right off (baked on from the Dyno and a couple track days). No discoloration at all. Make sure they're cool.

http://wizardsproducts.com/metal-renew-8-oz/

Careful with the Easy Off, don't leave it on there too long...

Thanks Guys! Looks like I will be doing some cleaning this weekend.

Easy Off may raise heck with aluminum heads

Fast Orange hand cleaner works very well and no nasty smell..TTI even suggests using it on their headers.
Todd