WINDOW NET WITH A SWINGOUT

I know this has been on here before but what mounting kit and window net are you guys using with a swing out bar?
Anyone with pix? Any fancy mounting hardware?
I looked through summit and none specific for swing out.
Thanks in advance.
Mike

Mike...My 64 isn't at my home but I think my stuff is Alston.

http://www.swracecars.com/store/Window-Net-Mounting-Kit-OSCARItem_315=75-370.aspx

Something like this with a cable is the only way I can think to use a window net and a door bar swing-out.

I use RJS Racing Equipment for the net(make sure you
use the ribbon style.. you dont have to recert it)..
they also have a hinged mount for it.... they also
make custom size nets.. just send them a template
http://businessfinder.mlive.com/rjs-racing-equipment-inc-hazel-park-mi.html

Thanks Guys, Both links were helpful, Also didn't know the ribbon style net did not have to be recerted.

I have an Alston's chassis works kit in my cuda. 10 pt. cage w/ swing outs and window net. Has a cable that attaches the front lower portion of the net down to the rocker bar. Rear lower is bolted to the main hoop. Top rear slides into a loop and then a pin attaches the top front. Don't think I have any pics of it on this PC or my phone.

I would like to see a picture of that, I have the same Alston kit!

Mine swings in or out. It is attached at the cage down tune with tabs & then attached at the top with the factory Chrysler flip seat belt buckle.

Found a better picture from inside.

Oops, sorry, I misread the post. Obviously, my bars are not swing out bars. I was thinking just a swing out net when I first read the post.

Here is what a came up with,i mounted the ends in heims so it drops right along side the seat and used a bicycle cable that is pre coyled and anchored to the floor.it easily swings up and down and latches. The top bolt is barely flush with roll bar so it is all inside the cage.this look like it will go through tech Alright?

Latch

I'm not sure about that cable. I have mine fastened at the top same as you. My back bottom is attached to the main hoop also. I should have a picture of mine during construction of mine. I do not have it on my phone. I am already at the airport but let me lookin my computer and see if I have the photo there. Will upload when I get to my hotel tonite.

Let's see if this works...



file:///C:/Users/reeves.ma/Pictures/Building%20a%20DP%20Challenger/Mine/InterionReinstall.jpg

Try the link... I have a complete file on the build on PhotoBucket the picture or there are several actually... I will share that so you can look and see how mine is done. Not saying your cable won't work but this will pass NHRA tech... Link to my photobucket account to follow....

Here is the link... Sorry for all the trouble but I'm not a IT person and know enough about computers to be dangerous....



http://s882.photobucket.com/user/mreeves...rt=2&page=1

Mack, first of all thanks for the pictures,and Damn your ambitious! Hell of a nice car! I do like how you mounted your net. I'm going to see if it will fly as is for now but I can see the way yours is would pass easyily.i saved the a bunch of you pictures, thanks for sharing!

How do you do that???

Take the picture address, and put this around it

[img] PICTUREADDRESS.com [/img]

But with no spaces. Photobucket has these codes already built for you on the website, just navigate to the picture and the codes are on the right hand side. Choose the top one, and past the [img] code around it.