torqueflite problems

Not sure what happened , I missed a shift went 1-3 and now when I shift into second it goes no where. It acts like it is trying to go but something is holding it . if I rev it in second it tries to pull hard but as soon as i let off it acts like i put the brakes on hard. The fluid smells burnt and it did get pretty hot. Anyone with any clues? I have 10 passes on it since the rebuild.

The servo is cocked and wont release the band..
you will be pulling the trans is cooked

What he said. Burnt fluid? Get it out and get it apart. Not sure why 1-3 shift would cause something to come apart or how the front piston could cock unless it broke. Maybe welded high gear clutch pack or broke something in that drum. Regardless, we can speculate, but it needs to go on the bench, get cleaned up and fix what's busted.

Its coming out just kinda wanted a heads up, not sure how one works so that gives me some info to check out.

They are pretty simple. Burnt fluid = black and blue parts, frictions ruined. Pictures of anything questionable help.

Where in KY are you?

They are not hard to replace parts in. If your around louisville you can get parts at W.I.T. (Whatever It Takes). They are in Brooks. 1-800-940-0197. They even have a book for $35.00 that is step by step instructions.

I'm in paducah area . If I am going to have to rebuild again Im looking in to the billet stuff that Andy on here sales. What clutches and steels do y'all run in yours.

I think the clutches are blue

The ones that i had put in at the rebuild were tci brand, not sure who makes them. I am hoping thats all that is fried

Are you still using the kick down crap?

its a manual shift vb