Big Block lifter bore bushings???

Any know of a place local to Dallas TX that can bush lifter bores for an aluminum Hemi?
Thanks in advance.

Reher Morrison can probably do most anything to an engine block. If they can't they would know someone who could.

I was told by a friend Reher Morrison will not touch a Mopar. I need to call them to find out myself.

Reher and Morrison will happily do it. The build engines for SS/AH I'm sure lifter bushings are a no brainer for them..

Does your freind drive a Chevy or Ford if not does he not want you to have better parts than he has

Somebody told you wrong. They will work on anything......plus they have a very good AH program as well

Great. Thanks for the replies. I will call them this week.

depends on what your meaning of "local" is

Terry Haddock at Lone Star Aluminum Block Repair in Temple, Tx



Joe

Thanks, No problem driving for quality work. Reher Morrison said they would need to check to see if they have the set up and would call me back.

Cannot imagine they don't have the jigs as they do AH stuff...

I agree Al but I'm waiting for a phone call back.

I'm thinking AH blocks get something non stock for lifter bore angles?

But if they have a CNC, which I assume they would, it should be no problem to get the right program ???

The have many CNC machines. It I a very large place with a number of dyno cells as well. Last time I was there they had a Mildon Block Hemi sitting in the showroom. They do Heberts AH stuff as well.

No doubt that RM can do the work but I don't have any idea if they want to or how backed up they are or anything like that. But if RM wanted to convert a Hemi to be an OHC engine they could make it happen.