ANY New S.B good piston stroke kit

When i built my stroker 6 yrs ago went with 4" ohio cast crank limited valve reliefs, compression kieth black .Has to be a better p/v piston Motor is deceased now .

So who sells a complete 4"steel short block or a 4"steel crank kit .
The combo my heads are eddies stamped 6077 with ferra 2.08 intakes milled .050.

Who makes a kit to get compression up but have reliefs to handle up to 600 lift.

I see alot of 408 looking at 410 to 418 ci
trying to get ideas before going to indy swap meet .
thanks don
looking for 9.90 et now

check with Dram

thanks tony.
time and money are both colliding .Really like to just drop a bullet in.If i dont get one in soon they are going to make me put in a big block goes against my dumb 32 years of racing .
don

Don,

If you try a big block you wont go back.

Quote:

---

check with Dram

---

I just got a kit from him for a 340 block and he made me a great deal on it. K1 crank and rods, Diamond custom pistons.