Posted By: formula S
Hose for external oiling system - 02/03/09 03:00 AM
I was told that regular steel braid hose would collapse if used as a suction hose, what do you guys think?
Quote:
There are a few diffrent grades of SS hose.We have seen new stuff that collaspes,usually if you have good pressure at idle and loose it as you increase rpm and regain it when you go back to idle rpm is a good indication that the liner is collasping.If you pull the hose and look through it you will the lumps in the liner,sort of looks like a hemmoroid in you rectal colon.
Quote:Quote:
There are a few diffrent grades of SS hose.We have seen new stuff that collaspes,usually if you have good pressure at idle and loose it as you increase rpm and regain it when you go back to idle rpm is a good indication that the liner is collasping.If you pull the hose and look through it you will the lumps in the liner,sort of looks like a hemmoroid in you rectal colon.
you got any pics of that so we know No,try bending over in front of a full length mirror and spread your butt. But seriously just take a scrap piece of SS hose fold it over a couple of times,you will feel and hear the lining seperate,then look through the hose and you will see what looks like lump in the lining.
Quote:Quote:Now that's funny right their, I don't care who you areQuote:
There are a few diffrent grades of SS hose.We have seen new stuff that collaspes,usually if you have good pressure at idle and loose it as you increase rpm and regain it when you go back to idle rpm is a good indication that the liner is collasping.If you pull the hose and look through it you will the lumps in the liner,sort of looks like a hemmoroid in you rectal colon.
you got any pics of that so we know No,try bending over in front of a full length mirror and spread your butt.
Quote:
A friend of mine has a B1 KB 572 with a KB oil pump, and KB told him to use this special suction hose, that I can't think of the name, but I did see the hose, and it has different hose fittings it looks like they are sweged and not reuseable. I really dont think that the steel braid part of the hose would collapse, but maybe the the non steel reenforced rubber hose inside would, I dont know just a thought.