Posted By: moparpilot1
rocker arms and vavle covers - 01/31/09 07:48 PM
anybody know if the old isky adj. ductile rocker arms will fit under stock big block vavle covers with about .550 lift thanks
Quote:I had one customer that use a small hole saw to remove the dented part of the baffle instead of dimpling it with a punch
We used to use them and the only problem we had was the adjuster hit the baffles in a couple of spots. A tap with a punch on the baffle gave us enough clearance with no problems. Use a thick gasket as well for a little more height. The new Moroso silicone type would work good I would think. Good Luck!
MFR426