intake gasket indy 360-1

Posted By: sshemi

intake gasket indy 360-1 - 01/30/09 08:18 PM

Does anyone have one they could scan into the puter or atleast take a photo and post?
Need to get measures if their (indy) intake will fit my heads.

Thanks

Posted By: sshemi

Re: intake gasket indy 360-1 - 01/31/09 01:21 PM

nothing???

Posted By: ichsam

Re: intake gasket indy 360-1 - 01/31/09 02:58 PM

if no one sends you a pic i will take one monday at work & send it to u

Posted By: sshemi

Re: intake gasket indy 360-1 - 01/31/09 03:05 PM

Thanks alot.

Email ardess

joelskoglund@telia.com

ps. if it wouldnt be to much to ask for could you please take some measures also with the center of the bolt holes as reference?

Posted By: sshemi

Re: intake gasket indy 360-1 - 01/31/09 04:48 PM

Any dealers here on moparts that have the 360-3r intake, in stock, in case it fits my heads?

Posted By: ichsam

Re: intake gasket indy 360-1 - 01/31/09 06:04 PM

no problem i will get it to you first of the week

Posted By: Forest

Re: intake gasket indy 360-1 - 01/31/09 09:11 PM

Hope this helps. I will send you a e-mail with the larger version of the pic.

Attached picture 4989043-IndyIntakegasketresized.JPG

Posted By: sshemi

Re: intake gasket indy 360-1 - 02/01/09 03:57 PM

here is a pic of what my heads look like.
You could almost think that someone did these heads to fit the 360-3r intake.
But i will wait and see if i can get some measures.

Attached picture 4991333-�vrigt006.jpg

Posted By: 1Fast340

Re: intake gasket indy 360-1 - 02/01/09 04:03 PM

that looks like one serious 59degre smallblock head:)

Posted By: RyanJ

Re: intake gasket indy 360-1 - 02/01/09 04:12 PM

The floor of your port is going to be the issue, it is way higher than an INDY head. You can make it work, but don't expect it to be a bolt on deal. We put INDY intakes on W5's all the time, just takes some effort.

Posted By: sshemi

Re: intake gasket indy 360-1 - 02/01/09 04:33 PM

What would be the best way to do it, lower the head port floor (depnding how much) or epoxy the bottom of the intake?

Posted By: RyanJ

Re: intake gasket indy 360-1 - 02/01/09 04:35 PM

Epoxy intake after you mill it to set your width.

Posted By: sshemi

Re: intake gasket indy 360-1 - 02/01/09 04:46 PM

Quote:

Epoxy intake after you mill it to set your width.

You dont happen to one that you could sell to me?

Posted By: RyanJ

Re: intake gasket indy 360-1 - 02/01/09 04:54 PM

No, you'll need to get one, figure out what gasket you gonna use & set the intake up for your heads. Just too many variables there (deck height etc) to be able to do a manifold for something like that without having it all in front of you.

Posted By: sshemi

Re: intake gasket indy 360-1 - 02/01/09 04:58 PM

I didnt meen one that is epoxied and ready.
I meen one that is ootb.
And i already kow what gasket thickness to use

Posted By: sshemi

Re: intake gasket indy 360-1 - 02/13/09 05:01 PM

Does anyone have the dim im looking for please.

Posted By: sshemi

Re: intake gasket indy 360-1 - 02/13/09 07:50 PM

please...

Posted By: RyanJ

Re: intake gasket indy 360-1 - 02/13/09 08:13 PM

You want the dimensions of an INDY 360-1 intake gasket opening? Is that correct?

Gasket intake port is 1.36" Wide, 2.16" Tall.... Floor of the port is .610" from bottom edge of the gasket. There's .290" above the roof of the port to the top of the gasket....

Posted By: sshemi

Re: intake gasket indy 360-1 - 02/13/09 08:33 PM

thanks alot.

whats the distance between the roof (or the floor)of the port to the intake bolt c-line?

Posted By: sshemi

Re: intake gasket indy 360-1 - 02/14/09 08:31 PM

anyone???

Posted By: sshemi

Re: intake gasket indy 360-1 - 02/15/09 07:53 PM

last

Posted By: RyanJ

Re: intake gasket indy 360-1 - 02/15/09 08:04 PM

PM me, so I remember to get you that measurement tomorrow when I'm at the shop. I was just there working for a while but did'nt read this post.