In for a little work

Look what showed up today

Hmmm that's why I saw a pic on FB of him on the Mississippi line

I'd rather go out in the backyard where the yellow road runner is buried....

GTX not buried, it's in the trailer. Has an appt at the chassis shop shortly..............lol

Cool!

He posted a pic of your bad side on facebook lol

Is he going EFI too?

Yes. I already had the intake. So I have to install that........wire and plumb car, as well as make some setup changes on the chassis

Awesome, im betting he will be up there with Monza, Dave and Doc then.

How many kits are on the E550?

Car is already fast enough to be at the top............just needs a little fine tuning here and there.

Was fast in Cash Days testing, but shook the tires hard at the race. Hence the chassis changes

Looks like a VERY merry Christmas. Nice!

What is the goal for ET?

He took it to the right guy!

I try not to comment on what any of these cars actually run. But it's fast NOW and we intend it to be faster......LOL!!!

The motor that was IN the car, was a 765......BUT, it was a 4.840 765. So just a ton of stroke, with a mediocre 4.840 head and 130lbs heavier than the 632 he just put in it, that has better heads and is a better all around combo. So power should be close, or even a little better, plus the weight loss and upcoming upgrades to EFI and better chassis setup

Are any of them using the pinion devise that some of the new Pro-Mod chassis have on them now?

You will have to inform me of what that is

Prob talking about a profiler I guess. Not sure what else it could be.

"Pinion devise on chassis"...........have NO idea, unless he is referring to some of the newer yoke containment cans that mount on the center sections now

Hope he likes your work Monte, that guy looks kinda mean! LOL.

I'd have to dig it up but saw a double wishbone set up on a car that was above and below the drive shaft..and attached to the pinion bearing plate....was a head scratcher. I kept thinking that thing has got to be A. heavy & B. A source of binding

So will see some more MONTY - T shirts!!

Just so I'm sure - your garage is pink inside? That's not quite how I pictured it for some reason...

It's like a kicker shock to stabilize pinion angle under load, and to dampen issues connected with tire shake.

Not pink...........I think they call it Desert Rose.........LOL!!!

Never heard of it, never seen it...........got a link? Can't see what it possibly does for pinion stabilization. If the bars and chassis aren't flexing, the pinion needs no stabilization

Very cool Monte

I agree !! Dude that's pink. None the less Monte gets to wrench on the Reaper.

I call pink, "safety red" lol

Now THIS is good news.

So what car got moved outside to make room? You must have a separate shop besides your garage.