A body with small block - best headers ??

My buddy has a 74 Duster with a 360 with 340 heads, it has power steering and power brakes. The headers he has now give zero ground clearance. What's the best solution for decent money ??

You have two choices, Doug's D453 and TTI. Doug's are cheaper, TTI are step Headers. I guess you can also do Hooker super comps too. I have Doug's on my 1974 Duster 360 and they fit great. I have PS and PB with auto trans.

Awesome - thanks !!!! I'll look into the Doug's

How's your ground clearance ?

Dougs from autozone with the 20% discount code they run almost every month. Can't beat the price.

They are over chassis and dont trap the suspensioñ like the cheap ones. Let me put it this way, my exhaust is now higher up then my transmission pan!

That's freaking awesome - thanks !!!

BTW I run a Summit cast deep trans pan.

Do you have a picture of that pan

I haven't tried posting pics with the new board so hopefully this works...

have one of those pans laying around.... just because I prefer the deep steel pans.

Here's a couple more pics

The price of the pan was right and it is pretty well made. My stock pan was in tough shape, so I figured a little more fluid could only help. Also figured the aluminum would dissipate heat a little quicker than steel which could only help here in the desert

You hit file manager at the bottom of the text
box.. then hit browse.. when you get it on your
computer double click the pic.. then hit add pic
then hit done.. hit submit

Thanks Mr P. I figured out a way, but nearly as simple. Learn something new everyday!

Another vote for Doug's.

Went on autozones web site all they had were flowtecks didn't have dougs listed, got a link I can use?

I vote for TTI. Outside as well as inside coating options. The 1 5/8"-1 3/4" step could help HP and torque #'s a bit over the straight 1 5/8", especially when hopping the engine up. They work great on my race car too running mid-low 11's (with TTI X-pipe & Dynomaxmufflers). Easiest to install and best fitting chassis headers I ever had.

TTI Exhaust

Lose the power steering. Then order a set of 5204 Hookers.

Loved the TTI's I had on my car. Install from the bottom as directed, and they are a breeze, with great ground clearance.

search D453 at the site. It will come up. Searching by make model is useless in their site. LOL

http://www.autozone.com/exhaust/exhaust-...PartNumber=true

453 is coated
453r is bare tubes

They just had a 20% off code expire on the 12th. Be patient, it will pop up again.

http://www.autozone.com/landing/page.jsp...hp_top_JINGLE25

Just got my TTi's friday and let me just say that they are absolutely mind blowing! The flange is gorgeous and craftsmanship is next level!