Posted By: 602heavy
Adaptor plate - 01/26/09 09:42 PM
Anyone got a part# for the adaptor plate between indy manold & carb? want to bring the dominator up level , the 4150 manifolds have the wedge built into them so the carb sits level.
Posted By: 602heavy
Re: Adaptor plate - 01/27/09 09:48 PM
Ok found the wedge plate.
Do most of you guys run the dominator with a tilt rearwards? or do you fit the wedge plate which brings it up 5/10*?
I realise the carb has to sit back a few degrees on a track motor , but if the front lifts on the launch would it not be better to level the carb.