Posted By: superhog88
looking for a member - 10/05/15 01:48 PM
there was a tread here i think the title was "gen 3 cant hold power" the guy had split a gen 3 aluminum block making gobs of horse power have looked through all the way back to april and cant find it looking for his name and if there are any usable parts left over from his engine thanks for the help
steve
Posted By: D-50
Re: looking for a member - 10/06/15 12:19 AM
I think his name is Rob Goss. He is the guy that has a Challenger with the Gen 3 Hemi that is ProCharged that runs in the 275 Drag Radial class. I do not know what he goes by on here.
Posted By: Just-a-dart
Re: looking for a member - 10/06/15 04:05 AM
67dartgt posted about Rob Goss's block problem
https://board.moparts.org/ubbthreads/ubbt...tml#Post1893289I don't think Rob posts here. I have seen some of his posts on Modern Mopar forum "boatman"
Posted By: 1967dartgt
Re: looking for a member - 10/07/15 04:42 AM
It's was back together a week after those broken block pics were taken. Was just don't in Georgia run some 4.50s. He does go by boatman on a few boards. Hhp in Delaware take care of the car for him.