Dana 60 Gearing?

Whats the highest sped (lowest number)gear you can get for a D60?

Thanks

Hey there.

i'll go out on a limb and say 3.54. Don't know if the factory offered any taller than that though

codfish

I believe it's 3:08
Dr Diff would know for sure

I think 354 is lowest that you can still buy new(not sure though)

Ford had 333's from the factory in some stuff. I was under the impression that 333 was the lowest, but I'm not sure on that either.

The lower ratio's do pop up on ebag once in a while

here some links that may answer your question..

http://www.drivetrain.com/dana60.html#Genuine%20DANAPICER

http://www.hotrod.com/techarticles/chassis/dana_60_axle_review/index.html

seems 3.54 would be the highest..

In the 1968 Mopar service manual,a 3.31 gear is listed.

from Ma Mopar it's 3.54

3.3 gears were available in Dana 60s.

3.08 gears were a Dana 61 piece.

DoctorDiff are those gear ratios still available?

Thanks

Unfortunately, 3.54 is the highest commonly available ratio.

I think 3.3 Dana 60 gears would sell fairly well.

I'd buy a set of 3.3's