Moparts
Peanut plugs again
Posted By:
RV2
Peanut plugs again -
08/25/15
03:15 AM
What peanut plug will work on a 906 head?
Looking for the 5/8 wrenching hex
Thanks
Posted By:
scratchnfotraction
Re: Peanut plugs again -
08/25/15
10:05 PM
autolite 85 for a 5/8 peanut plug.
Posted By:
RV2
Re: Peanut plugs again -
08/25/15
10:46 PM
Thank you
Posted By:
dogdays
Re: Peanut plugs again -
08/26/15
01:40 AM
Sorry, dude. Autolite 85 is the regular plug, 3/8" reach, 13/16" hex. I used up a ton of them in my '64Dog. Follow the link.
http://www.summitracing.com/parts/atl-85?seid=srese1&gclid=CKuQ9sezxccCFQeLaQodZjkE3A
R.
Posted By:
sgcuda
Re: Peanut plugs again -
08/26/15
02:45 AM
I cheated. For racing, I used lawn mower plugs Champion CJ8. 13/16" wrench but half the height. Great for header clearance.
Posted By:
scratchnfotraction
Re: Peanut plugs again -
08/26/15
02:49 AM
my bad, your right, those are the ones I just replaced with ngk xr5
autolite 23 should be the peanut plug..?
Posted By:
RV2
Re: Peanut plugs again -
08/26/15
03:23 AM
Crap!
I ordered some
Lol
Posted By:
scratchnfotraction
Re: Peanut plugs again -
08/26/15
02:23 PM
you can send them to me. I need another set for plug reading.
© 2024
Moparts Forums