528 mopar cam vaccum / valve lash ???

hi

would like to here from persons that have one in use !

will the 528 cam make enough vac to properly operate power brakes ??

what valve lash with ALU heads ?

thank you !

I have run this cam for years. Cannot help with Vac as I use manual brakes. I set my lash at 022 cold Int and 26 cold Exh . I run Eddy RPM heads .

only 1 person running this cam???

That is a good street cam. It pulls a ton of vacuum so don't worry about power brakes. I set mine up a little tighter than factory... .022/.026 cold. It seems to run better for me at that lash than the factory setting. (iron headed 440-6)

Tech Archives: http://www.moparts.org/Tech/Archive/bb/Lobe.html

This has been discussed MANY times, the search function works well.

Are you still running that cam? I thought you got a custom ground solid