Moparts
air bleeds .025 and smaller
Posted By:
dodgeram1998
air bleeds .025 and smaller -
07/27/15
07:07 AM
looking to source out where to purchase?
Posted By:
Jeremiah
Re: air bleeds .025 and smaller -
07/27/15
07:30 AM
10-24 thread?
Posted By:
B G Racing
Re: air bleeds .025 and smaller -
07/27/15
02:52 PM
Buy blanks and drill them .
Posted By:
justinp61
Re: air bleeds .025 and smaller -
07/27/15
02:53 PM
Posted By:
Mark Whitener
Re: air bleeds .025 and smaller -
07/27/15
04:03 PM
They are 10-32. BLP sells them down to .014. Same for 6-32 set screws used for emulsion bleeds.
Posted By:
Thumperdart
Re: air bleeds .025 and smaller -
07/27/15
04:14 PM
Originally Posted By Mark Whitener
They are 10-32. BLP sells them down to .014. Same for 6-32 set screws used for emulsion bleeds.
I too buy Holley or Quickfuel in the smaller sizes and drill em to my desired size........
Posted By:
dodgeram1998
Re: air bleeds .025 and smaller -
07/27/15
05:38 PM
thanks guys
I don't have drill bit smaller than .030
I haven't found drill bits smaller than .030
where to find?
Thanks for the BLP idea
Posted By:
justinp61
Re: air bleeds .025 and smaller -
07/27/15
05:48 PM
I bought a USA made numbered set of Amazon. Fastenal probably has the too. If you have to buy pin vices go ahead and buy Starretts and be done with it.
© 2024
Moparts Forums