New best

With sb 366cid twin s400-80 bw turbos





And new combo still some tuning left

Wow nice work! What block/heads?

R3 9.0 deck 48 deg. with some mods.
6" mgp rods diamond pistons and molnar 3.58 crank
Steve Morris cam (procharger design)
W8 lemans heads
Holley dominator efi moran 500lbs inj. methanol
Holley cop

Hell ya, way to go and wave the MOPAR banner.........

162 MPH at the 1/8 is moving.
198 MPH at the stripe is no joke.

Wicked ride!

Car have wrong rear gear 4.29 data say i hit rev limiter in 6.0 sec.

Hope i get 4.1 gear to next race that would help short first gear too (powerglide 1.8)

Congratulations nice run.
Have the heads been ported from the LMP port?
If not I would say you have more room to grow.

Did you have main cap problems?

Hope to have some of my CNC w8 stuff on 3 turbo boost builds.

Again killer job guys.

And that 4.479 ET in the 1/8, 6.909 ET in the 1/4 is impressive too!

I told you it will go 6.80,

That has to put a big old smile on your face Good job, keep tuning

Smokin!!!! that thing is haulin!!

Heads are ported from LMP port but maybe there is little room to grow more.
And yes one shop ruined main caps with over balancing my engine.
My friend is cnc machine guy so he make new maincaps and "girdle"
Thanks Kenneth

Badazz!