first outing with the w8 mill

I need to get used to the power glide

Looks good Shiloh. What et?

9.15 et 148mph soft past hope to get it out soon and get my 8 sec time slip. The pic was taken at Irwindale but it came down hard on the oil pan that pass

Nice! What headers ? Any pics ?

Off topic...Is Irwindale still on the chopping block???

Next time you go out give me a heads up wouldn't mind see your car run

REF Headers IIRC.

You up and running again? Going to the Mopar Race at Famoso? I'm skipping that one..... too far, too hot.

Thats good mph with that ET. You will be looking at 8's easy.

Nice Dart! I don't think I've seen the combo on this one?

looking good

Yes Al Irwindale property was sold to a developer. Current lease is good thru the end of the year, it could maybe go into next year.

Rumor is they would like to do a full width 1/8th mile in the area, and city of Irwindale may help. Talk is cheap we will see.

Where did you get that Uglyass K-member Shiloh?

12.8to1 440 w8 heads by Brett miller 420 intake sv1 carb burning e85 power glide 3080lb with me in it. 55mm roller. Air that day was 4400ft and 93 degrees..next outing will be with wheelie bars.

a local guy that goes by the name ((just a dart)) built the kmember .. i never dreamed the car could drive so well. and it held up after i drove it into the concret. .and took out the oil pan

jay I have pm you but I don't think they get through can't make it because of work

Very nice first outing, seems there is a bit more in it. Nice run!

That may have been the first one that was scraped from the shop up in northern Glendora?

Shiloh I looked for you at the last NMCA race in Fontana, was hoping to get a bunch of pics of your car. Sorry to hear you smashed up your oil pan.

I will be making the next two nmca races at Fontana

Congrat's on the outing nice dart

That thing is gonna fly in good air......

WAs it fun? It will go 8's easy

Very nice first outing! That thing RUNS!

how can I play the vid? would like to see it run.

VERY nice man and no doubt an 8-second pass to come.............

Great result!

Very nice looking and running car. Mopars are going faster with less every year

Nice pass

all I can say is building this engine I have met some very great people and I would like to thank everyone of you. My goal was 750hp. And with Bretts great head work. More power was easy to find. I was told by my machinist that my cylinder heads could make upwards of 900 horse power.so maybe some more compression and camshaft.may be in order soon..