Posted By: 340SIX
How much Compression? - 01/18/09 09:52 PM
340 block{X race block} bored to stock 4.040 bore square decked and line honed.
Forged TRW flat pistons {tops milled off to to get 0.020 in the hole] since they normaly are out the hole 20-30.
Mopar aluim heads that CCed at 52.5
Fel Pro 1008 think are 0.030 thick{just like the 1009 for BB mopars}
stock stroke crank
Forged TRW flat pistons {tops milled off to to get 0.020 in the hole] since they normaly are out the hole 20-30.
Mopar aluim heads that CCed at 52.5
Fel Pro 1008 think are 0.030 thick{just like the 1009 for BB mopars}
stock stroke crank