Posted By: johnnyrotten
360 piston ? - 01/16/09 08:35 PM
I have an old 360 with what appear to be TRW forged pistons. They have L2426 stamped on them. Anyone have an old catalog with any info on these? Thanks 
360 piston ?
Posted By: 500ciDuster
Re: 360 piston ? - 01/16/09 10:18 PM
They have a compression distance of 1.704 & .407 dome height, 12.77 compression ratio w/dome & 68.4 cc head, Then a foot note that the dome can be reduced to .050 then the compression ratio will be 11.29.
Mitch
Mitch
Posted By: johnnyrotten
Re: 360 piston ? - 01/16/09 10:34 PM
Thanks for the info! What is the cc of a standard 915 J head?
Posted By: Cab_Burge
Re: 360 piston ? - 01/17/09 03:56 AM
Quote:I thank that the NHRA blueprint specs are 63.8 cc, maybe not
Thanks for the info! What is the cc of a standard 915 J head?
The piston maker should have a blueprint spec. for that piston also 
Posted By: 500ciDuster
Re: 360 piston ? - 01/17/09 08:37 AM
True, there was a foot note that said there was a 71 2bbl head that was a 62.8 cc head!
Posted By: patrick
Re: 360 piston ? - 01/17/09 06:46 PM
340 & 360 open chambered heads usually run ~72cc....
Posted By: 602heavy
Re: 360 piston ? - 01/17/09 08:55 PM
Wrong thread sorry 