Moparts

Jetting Suggestions needed

Posted By: Dart Racer

Jetting Suggestions needed - 04/15/15 10:02 PM

I live in So Calif and am headed to Denver for the Night of Fire and Thunder in the middle of May and quite frankly not sure how much jetting change to make to keep the ole Dart running good. Any rule of thumb I can apply to my 500" big block? I have a Demon 1050 on it.
Posted By: ajcasini

Re: Jetting Suggestions needed - 04/16/15 02:58 AM

2 jets per 1000' difference.
Posted By: Mark Whitener

Re: Jetting Suggestions needed - 04/16/15 03:20 AM

a bit much if its gas. Jet per 2000 if it were me.
Posted By: Dart Racer

Re: Jetting Suggestions needed - 04/16/15 04:09 AM

It is on gas.

Thanks to both for your help. up
Posted By: Cab_Burge

Re: Jetting Suggestions needed - 04/16/15 07:19 AM

I use to figure ands use one jet size up on the Holleys going from LACR to Orange County or Bakerapatch. Going to Vegas or Inyokern I would leave it alone,jet it up two sizes at Fremont, Sears Point and Sacramento.That was on Daeco race gas available back then.I would be willing to try one jet size down(leaner) for each 2000 ft increase in density altitude measured on a good weather station work
© 2024 Moparts Forums