Posted By: 440lebaron
727 dip stick lenght - 03/26/15 03:31 PM
hello,
can anyone measure fill mark on dipstick from pan rail (above/below) inside 727 tranny with pan off?
need to make custom stick on tube chassis car,
thanks
gary
Posted By: John_Kunkel
Re: 727 dip stick lenght - 03/26/15 10:29 PM
The FULL mark on the dipstick is 1/4" above the flat area on the case where the dipstick tube is inserted.
Posted By: sleddinfool
Re: 727 dip stick lenght - 03/27/15 03:10 AM
You can also contact Dan at Masta performance.com. All he does is build trick dipsticks and tubes. Have had them on both my cars.If you look close you can see both on my engine/trans Kevin
Posted By: steve660
Re: 727 dip stick lenght - 03/27/15 03:41 AM
Interesting question...What if you have a 8" converter. How accurate would the STOCK dipstick be??