wilwood brake line.

where would I get lines for these ? I need braided
lines for the calipers..inlet size is 1/8-27 NPT

We use 1/8NTP to #4 and #3 AN,straight,ninteys,and fortyfives for our brake lines.We buy in bulk(Airquip)NAPA usually have the fittings.You can buy the kits from Summit or Jegs,about $75.Any good hyd hose place can make up the high pressure #3 or #4 AN lines for you.If you can't get any and you know what fittings and length of line you need call and I will fix you up.

Thanks Bob ..I will see how long they need to be,, going on my Dart..??

I used These to adapt the hard lines to the -3 AN lines. I used Russel steel braided brake lines with a 90 degree on one side and a straight on the other. The 90 went to a straight 1/8NPT -3AN adapter in the caliper.

Quote:

---

Thanks Bob ..I will see how long they need to be,, going on my Dart..??

---

Aprox.14" to 15" They make an adapter that goes on your frame clip(u-clip) that goes from AN to your stock brake hard line.