Moparts

Carburetor Porn

Posted By: Jeepmon

Carburetor Porn - 02/28/15 06:04 AM

What do you guys think?

Posted By: skicker

Re: Carburetor Porn - 02/28/15 06:10 AM

It does look interesting.

Send it to me and I'll let you know...

Posted By: Crizila

Re: Carburetor Porn - 02/28/15 06:15 AM

Mileage is gonna suck. I like the purple butterfly's with giant air bleed holes in them.

Posted By: sixpackgut

Re: Carburetor Porn - 02/28/15 06:34 AM

Very nice. I need one for my van

Posted By: SB412DUSTER

Re: Carburetor Porn - 02/28/15 07:14 AM

What's the throttle bore on that bad boy? Looking at the bottom it sure looks bigger than 2" Maybe 2.125

Posted By: Al_Alguire

Re: Carburetor Porn - 02/28/15 08:56 AM

That three circuit junk will never work

Posted By: Jeepmon

Re: Carburetor Porn - 02/28/15 09:02 AM

Quote:

That three circuit junk will never work

I've heard that somewhere before...

Posted By: Jeepmon

Re: Carburetor Porn - 02/28/15 09:07 AM

Quote:

What's the throttle bore on that bad boy? Looking at the bottom it sure looks bigger than 2" Maybe 2.125

As of right now, I do not have any specs or information... all I have is the pics..

Ryan Bell is building my motor and is very close friends of Braswell... Ryan gave Braswell the specs on my motor and this is what he whipped up.. With a little luck, the motor will be on the dyno next week and I'll have more information

https://www.facebook.com/pages/Braswell-Carburetion/320755068324

Posted By: 1Fast340

Re: Carburetor Porn - 02/28/15 12:17 PM

Quote:

What do you guys think?

Thats not for a "360 stroker" is it?

Looks good to me.

Posted By: Al_Alguire

Re: Carburetor Porn - 02/28/15 05:58 PM

Quote:

What's the throttle bore on that bad boy? Looking at the bottom it sure looks bigger than 2" Maybe 2.125

I know but not telling yet. We will expand upon some of the info after it hits the dyno. After all we cannot let the cat out of the bag here to everyone when the owner does not know

BTW since the subject has come up elsewhere. It is going on a very accurate dyno, most would say quite stingy. Point being it has had hundreds of engines on it from Stock eliminator to Aussie Pro Stock and Comp. So we will have a very good idea what it will make and what the car should run. It is not an all out effort but should be a relatively maintenance free deal.

Posted By: Jeepmon

Re: Carburetor Porn - 02/28/15 06:10 PM

Quote:

I know but not telling yet. We will expand upon some of the info after it hits the dyno. After all we cannot let the cat out of the bag here to everyone when the owner does not know

Sucks when the owner is left out of the loop..

BTW... I've been doing some reading on this Braswell guy.. He has a reputation as being one of the best when it comes to building go fast carburetors...

Posted By: Monte_Smith

Re: Carburetor Porn - 02/28/15 06:39 PM

Nobody better than Dave Braswell...............Personally I rate him and Dale Cubic at the top of the heap

Monte

Posted By: toddd

Re: Carburetor Porn - 02/28/15 08:26 PM

Very sweet piece.

Posted By: 68-scatpack-rt

Re: Carburetor Porn - 02/28/15 09:34 PM

Quote:

Nobody better than Dave Braswell...............Personally I rate him and Dale Cubic at the top of the heap

Monte

Dale lives 10 minutes from me.
He just built a marine carb for my boat project.
Great guy!

Posted By: J_BODY

Re: Carburetor Porn - 02/28/15 09:54 PM

......so I guess you want me to stop! I told you I HAD THIS!

Posted By: Dartin

Re: Carburetor Porn - 02/28/15 11:16 PM

lol

Nice looking piece for sure

Randy

Posted By: hemi-itis

Re: Carburetor Porn - 03/01/15 06:59 PM

Quote:

Nobody better than Dave Braswell...............Personally I rate him and Dale Cubic at the top of the heap

Monte

Whatta 'bout Patrick??

Attached picture 8444982-3.6.14024.jpg

Posted By: Mark Whitener

Re: Carburetor Porn - 03/01/15 08:01 PM

Looks to be about a 2.150 throttle bore, venturi is a little tougher , 1.82-1.90. Older non HP Dominator, I do like those castings.

Posted By: Mark Whitener

Re: Carburetor Porn - 03/01/15 08:05 PM

Want carb porn?

Posted By: dodger mope

Re: Carburetor Porn - 03/01/15 08:13 PM

Want carb porn?

i don't smoke,but anybody got a cigarette!

Posted By: J_BODY

Re: Carburetor Porn - 03/01/15 08:18 PM

carbs prettier than the rest of my car....

Posted By: Monte_Smith

Re: Carburetor Porn - 03/01/15 09:56 PM

Quote:

Quote:

Nobody better than Dave Braswell...............Personally I rate him and Dale Cubic at the top of the heap

Monte

Whatta 'bout Patrick??

I stand by my previous statement

Monte

Posted By: hustlin hoosier

Re: Carburetor Porn - 03/03/15 01:40 AM

I have a cabinet full of Patrick's stuff. I would give someone a deal on it! We have gone to Book and Cubic. There is no comparison. We have never tried Braswell. Cubic is 200 miles away and Book is 50.

Posted By: 68-scatpack-rt