Posted By: steve660
622 starter recommendations / experiences - 02/27/15 03:23 AM
What starters are you using on BIG CI engines?? Looking for a starter for 622 wedge. It has 11.5-1 compression. I have Mopar mini starter but don't think it has enough oomph. Looking at Powermaster 9523. Also see MSD has starters now too.
Posted By: quickd100
Re: 622 starter recommendations / experiences - 02/27/15 03:27 AM
I use a mopar mini starter on my 605, it's only 10.4-1. No problems what so ever. Dave
Posted By: steve660
Re: 622 starter recommendations / experiences - 02/27/15 04:58 AM
No 9523 isnt the clockable one. That one looks like a PITA!! Maybe the Mopar mini starter is the way to go.....
Posted By: sublimehemi
Re: 622 starter recommendations / experiences - 02/27/15 09:21 AM
i bought this special meziere ts306....none better
Posted By: steve660
Re: 622 starter recommendations / experiences - 02/27/15 05:19 PM
Ok thanks Chip. Ill run the Mopar mini.
Mr. P....I'll have to check.. Its either a 1 or 0 gauge cable to the starter. Ive ran the mini starter on my old 496 for years without problems. Guess it's tougher than I thought. Thanks guys, ya just saved me $250!!!
....GOOD LUCK with it!! I had one,,,,3-4 times off & on and back to them for repairs/upgrades/etc. I finally threw it in the junk and used a Mopar mini. The Powerbastard lasted about 15 starts the first time before it broke. The next couple of times less than 15 and then ate up my ring gear on my convertor. Mopar mini has been on for over 4 years with NO problems. 493" 13.5:1
Same here on my 572" 11:1 motor. Used the same starter on my 14.5:1 446" motor too. Never had any issues after many years on the same starter.
