Posted By: rebel
Scorpion rocker arms for Indy -1's - 02/23/15 07:19 AM
i see these rockers on another post. has anyone actually used them? are they good or should i stay shopping with the T&D/HS arms. does anyone know what they're worth?
http://www.scorpioncheckout.com/Endurance_Series_Stud_Shaft_Mount_Rockers_s/192.htm
Posted By: EchoSixMike
Re: Scorpion rocker arms for Indy -1's - 02/23/15 08:14 AM
-1's are .800 offset right? They're not making those AFAIK, .650 is as large as they go. I don't know if prices are out yet. They weren't as of last weekend. S/F...Ken M
Posted By: BradH
Re: Scorpion rocker arms for Indy -1's - 02/23/15 10:07 PM
Weird... their web page in the link I posted on the other thread specifically mentions coverage for Indy 440-1 & Big EZ heads, yet the list of offsets available doesn't fit w/ that application.
Other than that, they're a complete unknown since "we" just kind of stumbled across them recently. They look like modified Hughes rockers IMO and don't use needle bearing fulcrums, either.
Posted By: BradH
Re: Scorpion rocker arms for Indy -1's - 02/24/15 12:20 AM
Yes, Scorpion has been around for some years. But this is their first Mopar attempt.
Didn't say they ARE Hughes rockers; I said they looked like modified Hughes. So, let me restate it differently: They look to have been INSPIRED to some extent by Hughes, although Scorpion has certainly added their own touches.
Posted By: BBR
Re: Scorpion rocker arms for Indy -1's - 02/24/15 12:32 AM
Scorpion rockers are made in the USA. Good stuff.
I have been very impressed with the 2 sets (BBF) I have owned.
Posted By: Anonymous
Re: Scorpion rocker arms for Indy -1's - 02/24/15 02:18 AM
Talked to them today--they are testing at the moment--they plan ball/ball and ball cup style They make fantastic products--ultra good quality in 100% modern factory--awesome outfit! Lifetime warranty--I have beat on Scorpions for other brands for a long time--can't be beat for the $$
USA USA USA!!!!!!!!
Posted By: Project kickin A
Re: Scorpion rocker arms for Indy -1's *DELETED* - 02/24/15 12:42 PM
Post deleted by Project kickin A
Posted By: Chuck West
Re: Scorpion rocker arms for Indy -1's - 02/25/15 12:05 AM
Scorpion has 1 plant in Ocala. I think it's the Headquarters and the other is in or near Daytona.
Not sure if they are set-up for 'walk-in' retail traffic in Ocala or not?
It's been about a year since I was there.
Great people and once they get their products dialed in and released, it's very good stuff!
Call them! They've always been very helpful!
Posted By: EchoSixMike
Re: Scorpion rocker arms for Indy -1's - 03/19/15 02:00 PM
Anyone seen a price for the Scorpion rockers yet? S/F....Ken M