Posted By: all spooled up
connecting rod weight? - 02/10/15 12:16 AM
what is a good connecting rod weight for a small block 6.125 long rod
connecting rod weight?
Posted By: MR_P_BODY
Re: connecting rod weight? - 02/10/15 12:26 AM
Quote:
what is a good connecting rod weight for a small block 6.125 long rod
Being 6.125 I assume chevy... is it a I or H beam
Posted By: rt66jim
Re: connecting rod weight? - 02/10/15 01:29 AM
My CAT H beams weigh 735gm about the same as a stock rod. They are 6.123 long. I have a set of Pankle's that are 6.4 long and weigh 585gm.
Posted By: all spooled up
Re: connecting rod weight? - 02/10/15 01:46 AM
chevy ls7 thay are 466 grams.
Posted By: dogdays
Re: connecting rod weight? - 02/10/15 05:48 PM
For a Mopar 6.123 they'll usually come in about 650 grams. The SIR rods are close to 600, can't remember if over or under.
A 6.125" chevy rod should weigh around 600 grams, I have some that were heavy duty right at 660.
Stock Mopar rods are clubs, IIRC 728 and 756 grams.
R.
A 6.125" chevy rod should weigh around 600 grams, I have some that were heavy duty right at 660.
Stock Mopar rods are clubs, IIRC 728 and 756 grams.
R.