Cylender Head shops

Posted By: Budsworth

Cylender Head shops - 02/08/15 11:28 PM

I have a set of Small-block Eddy's pn#6077 untouched and want to send them out to have them ported as well as a real valve job done. I have read on the board here "Modern Cylinder Head" (Jeff?) What would be a realistic price range to have them done right? Do they service the little guy or are they a Big boy shop? I also want to run a flat tappet cam from Cam Motion. my goal is to make a 600hp 408cui at 12.0:1. My car is 2850lbs hoping for a slip in the 10.0s

Posted By: Wv68charger

Re: Cylender Head shops - 02/08/15 11:31 PM

Try calling Best Machine

Posted By: 70AARcuda

Re: Cylender Head shops - 02/08/15 11:32 PM

I Have had two set of sb eddy heads done by MCH.
CNC porting and valve job with springs set up cost around 1k. I dont know their current price...just call and ask.

Shop is currently run by Bob, Jeff his brother passed away.

Posted By: fourgearsavoy

Re: Cylender Head shops - 02/09/15 02:48 AM

I like Nick Wilson at compu-flow

www.compu-flow.com

Gus

Attached picture 8423483-moriaburnout.JPG

Posted By: fullmetaljacket

Re: Cylender Head shops - 02/09/15 03:50 AM

Best Machine first or Shady Dell.

Posted By: greendart408

Re: Cylender Head shops - 02/09/15 04:10 AM

Brett Miller is who I would use, do your research, be careful of the so called guru's.
Speaking from experience here, and others I know that have dealt with same thing. I am going to leave it at that. There is a bunch that can get the job done...

Posted By: W5DART66

Re: Cylender Head shops - 02/09/15 04:21 AM

Posted By: 69CHARGERMD

Re: Cylender Head shops - 02/09/15 05:21 AM

Porter Racing

Posted By: hemi-itis

Re: Cylender Head shops - 02/09/15 05:45 AM

Can't go wrong with shady Dell or porter

Posted By: mopar dave

Re: Cylender Head shops - 02/09/15 06:17 AM

Dwayne [Email]welder@1-586-909-3207[/Email] or Dwayne porter.

Posted By: MR_P_BODY

Re: Cylender Head shops - 02/09/15 06:34 AM

Call Modern and get them CNC and the valve job..they
can set the springs if you know what cam.. 600 hp
is doable with a 408... I'm making 590 hp with 10.4
compression on my 416... and it runs on 87 octane..
I'll race it on 93

Posted By: BradH

Re: Cylender Head shops - 02/09/15 03:47 PM

I see you're in Ontario. Dwayne Porter is in Vermont, and IMO should at least be worth a call to discuss what you're looking to do.

Porter Racing Heads
1-802-951-1955
57 Commerce Ave, Suite 2
South Burlington, Vt. 05403

Posted By: Airwoofer

Re: Cylender Head shops - 02/09/15 07:23 PM

Mike at MRL does a pretty good job with SB Eddys too.

http://www.mrlperformance.com/

Posted By: DblOJoe

Re: Cylender Head shops - 02/09/15 07:31 PM

http://www.dunnuckracing.com/

The best I've ever dealt with!

Posted By: OhioMopar

Re: Cylender Head shops - 02/09/15 08:11 PM

Quote:

I like Nick Wilson at compu-flow

www.compu-flow.com

Gus

I just bought some stuff from Nick. Super good guy. I would send my stuff to him in a heartbeat.

Posted By: MartyQ

Re: Cylender Head shops - 02/09/15 08:41 PM

http://www.compu-flow.com/ Nick super guy !!

Posted By: Twostick

Re: Cylender Head shops - 02/09/15 10:24 PM

What part of Ontario?

Hewitt Automotive Machine in Brockville does excellent work.

Kevin

Posted By: Twostick

Re: Cylender Head shops - 02/09/15 10:28 PM

On pricing, Modern IIRC did the CNC Stealths for 440Source and they were $1000 extra.

With the current exchange rate, that is about $1300 plus shipping.

Kevin