Posted By: ccdave
intake gasket thickness options? - 01/10/09 02:47 AM
Is there a company that makes different thickness intake gaskets for BB Mopars? What is the range?
intake gasket thickness options?
Posted By: MR_P_BODY
Re: intake gasket thickness options? - 01/10/09 03:03 AM
Big block or small block..... small blocks, there
is multiple thicknesses, the ones I know of are
.015, .030, .045, .060 and I think .090... thats
not counting doubleing up gaskets in asorrted thicknesses
EDIT
I see that you said BB... sorry I'm not sure of them, yet
is multiple thicknesses, the ones I know of are
.015, .030, .045, .060 and I think .090... thats
not counting doubleing up gaskets in asorrted thicknesses
EDIT
I see that you said BB... sorry I'm not sure of them, yet
Posted By: ccdave
Re: intake gasket thickness options? - 01/10/09 03:26 AM
Mike, who makes them? I currently use a Hughes gasket and a Felpro face gasket to get the correct thickness. I would like to find a .080 intake gasket. 
Posted By: MR_P_BODY
Re: intake gasket thickness options? - 01/10/09 03:40 AM
Quote:
Mike, who makes them? I currently use a Hughes gasket and a Felpro face gasket to get the correct thickness. I would like to find a .080 intake gasket.
For the small blocks I use mostly Mopar and Felpro,
I think I have about 6 or 8 sets of each thickness
hanging on the wall for W-2, W-5, W-8, W-9 plus a
few sets in the trailer of each
But I havent got a stock of BB yet
Posted By: blownzoom440
Re: intake gasket thickness options? - 01/10/09 03:43 AM
i use fiber gaskets on mine but thay came from BDS and the blower shop.search the summitracing site i am sure you will find some.
Posted By: Cab_Burge
Re: intake gasket thickness options? - 01/10/09 06:50 AM
Quote:SCE gaskets in Lancaster, CA makes just about any thickness you want, shelf or custom 1-800-427-5380 they do a lot of NASCAR gaskets and other roundy round race only stuff,very good people to work with on custom Hi Po gaskets
Mike, who makes them? I currently use a Hughes gasket and a Felpro face gasket to get the correct thickness. I would like to find a .080 intake gasket.
Posted By: Anonymous
Re: intake gasket thickness options? - 01/10/09 07:10 AM
Quote:
Mike, who makes them? I currently use a Hughes gasket and a Felpro face gasket to get the correct thickness. I would like to find a .080 intake gasket.
are you saying your running a standard valley pan and a thin face gasket? not sure what you mean by a "hughes" gasket?
which heads and intake manifold? B? RB?
Posted By: ccdave
Re: intake gasket thickness options? - 01/10/09 04:17 PM
Dram, I'm running a Hughes flat valley pan with Hughes intake gaskets. The pic should explain the rest. An .080 gasket would be great for my application.
Posted By: ZIPPY
Re: intake gasket thickness options? - 01/10/09 07:09 PM
Thickest I know of is Mr Gasket 4691G, but it's only something like .062 or .063.
Mopar's thickest one is about .045 so that isn't going to work.
Mopar's thickest one is about .045 so that isn't going to work.