Roller lifter hydrolique

Posted By: Anonymous

Roller lifter hydrolique - 01/09/09 09:26 PM

hi everyone,

I want to buy new roller lifter hydrolique with the best quality and performance. My block is 340 stroke 416 1971.

Thank you for your anwser.

Posted By: 69Cuda340S

Re: Roller lifter hydrolique - 01/10/09 02:24 AM

Check this thread out. This is something you want to watch out for:

https://board.moparts.org/ubbthreads/show...rue#Post4638132

Posted By: Anonymous

Re: Roller lifter hydrolique - 01/12/09 10:39 PM

Thanks Bill for your answer and that help me a lot

Bernard Roy

Posted By: 69Cuda340S

Re: Roller lifter hydrolique - 01/13/09 01:39 AM

One other thing. Those hydraulic roller lifters are about 1/2" taller then the stock lifters so shorter push rods are needed. And pay close attention to the push rod holes in the heads. They will need to be clearanced.