Posted By: 68CudaB1
B1 Header Flanges - 01/08/09 02:42 PM
In the past I have seen a Moparts member who makes B1 header flanges....are you still around?
B1 Header Flanges
Posted By: MR_P_BODY
Re: B1 Header Flanges - 01/08/09 02:56 PM
Talk to Bigdad, he has a buddy that machine's them up
Posted By: B1Frank
Re: B1 Header Flanges - 01/08/09 03:49 PM
I am needing the same info, Geting ready to build a set for my ride, 
Posted By: B1Frank
Re: B1 Header Flanges - 01/08/09 05:55 PM
I have seen two type's of flange's,..single cylinder flange's, and the reg flange's like on a standerd header, can you guy's give me some info on these ??? for the B1 org head's 
Posted By: Al_Alguire
Re: B1 Header Flanges - 01/09/09 05:19 AM
Well the non one piece collectors are for those of us who use multi piece headers. Kind of required to fit bit tubes in stock frame rails with all the stock steering etc..FWIW I had mine just laser cut from a set of gaskets.
Posted By: MR_P_BODY
Re: B1 Header Flanges - 01/09/09 02:21 PM
Quote:
I have seen two type's of flange's,..single cylinder flange's, and the reg flange's like on a standerd header, can you guy's give me some info on these ??? for the B1 org head's
This is what I sent to Bigdad's buddy to copy so
he could CNC them
Posted By: MR_P_BODY
Re: B1 Header Flanges - 01/09/09 02:23 PM
#2
Posted By: MR_P_BODY
Re: B1 Header Flanges - 01/09/09 02:28 PM
Last one
Posted By: B1Frank
Re: B1 Header Flanges - 01/09/09 02:44 PM
Thank's guy's on the info, I know this has been on her before, put could not remenber the person that made them !!!....Thank's to all.
Posted By: B1Frank
Re: B1 Header Flanges - 01/09/09 02:58 PM
MR P BODY can you shoot me a pm with info on geting a set made,...Thanks B1 Frank.
Posted By: Al_Alguire
Re: B1 Header Flanges - 01/09/09 03:19 PM
You can buy them from SPD exhaust. They have them in stock usually, very nice pieces.
http://www.spdexhaust.com/pdfs/HeadFlanges/Wedge.pdf
http://www.spdexhaust.com/pdfs/HeadFlanges/Wedge.pdf
Posted By: B1Frank
Re: B1 Header Flanges - 01/09/09 03:22 PM
Thanks AL....
Posted By: 68CudaB1
Re: B1 Header Flanges - 01/09/09 05:37 PM
That is where I am ordering mine from - Not in stock BUT only 2-4 day lead time plus 3 day shipping....
A little steep I thought at $160 plus $20 for the shipping but........
A little steep I thought at $160 plus $20 for the shipping but........
Posted By: Al_Alguire
Re: B1 Header Flanges - 01/09/09 05:40 PM
I meant ot put in there that they are not cheap on anything they sell. But the quality on everything I have ever gotten from them was great.
Posted By: 68CudaB1
Re: B1 Header Flanges - 01/09/09 05:48 PM
Quote:
I meant ot put in there that they are not cheap on anything they sell. But the quality on everything I have ever gotten from them was great.
That is the exact reason (quality) we are upgrading, did not like the fit of the others we were using..so that sounds great....they are worth the price tag.
Thanks for the input, I am gonna order a set!!
Posted By: B1Frank
Re: B1 Header Flanges - 01/09/09 08:01 PM
Hey guy's do you know were to get the single B1 header flanges , like AL was talking about for a big tube take apart header ???
Posted By: cold85
Re: B1 Header Flanges - 01/10/09 02:32 PM
I should have some in a few weeks they will be better price than most because a friend of mine gives me a great deal on his laser cutter and cnc machine.