Posted By: griff70440
Mopar block repair question - 01/03/15 01:22 AM
Hi Guys,
I found a aftermarket block that had a hair 3" line crack repaired. The crank was in the timing chain area from #1 cam journal down toward the oil pump. the crack wasn't all the way through the block.
I can pick it up cheap... What do you guys think?
It will end up being the home for a 572 race motor.
Thanks
Mike
Posted By: birdtracker
Re: Mopar block repair question - 01/03/15 01:36 AM
aluminum or steel? Birdtracker
Posted By: birdtracker
Re: Mopar block repair question - 01/03/15 02:57 AM
if a cam goes in it and turns freely, on my budget I would give it a shot. Do you think a gear drive caused it or ??????? Who did the repair? Birdtracker
Posted By: Cab_Burge
Re: Mopar block repair question - 01/03/15 04:31 AM
How was it repaired, welded, brazed or stitch lock repair? Also which block, Mopar, World, Indy or Koleno ?
Posted By: griff70440
Re: Mopar block repair question - 01/04/15 02:56 AM
thanks for the replies.
the block is a Mopar block. It looks like it was welded. I took the
to my motor guy today. He thinks the damage was done from a gear drive. The good news is,he thinks the block is very useable.
thanks and Happy New year!
Posted By: birdtracker
Re: Mopar block repair question - 01/04/15 07:44 AM
Rock on! I know the gear drives are suppose to have side clearance. They recommend a piece of newspaper.If it didn't have any I could see it cracking the block. Birdtracker
Posted By: griff70440
Re: Mopar block repair question - 01/05/15 12:51 AM
I`ll keep you guys posted as the motor starts to go together.