Posted By: bobs69
A -Body fender exit headers - 12/27/14 05:35 AM
Anyone have pictures of A-Body fender exit headers with the engine in stock position?1967 68 69 Barracuda would be really good. Under hood pictures please. Thanks 
A -Body fender exit headers
Posted By: 440Jim
Re: A -Body fender exit headers - 12/27/14 04:15 PM
Oops. Sorry, I was thinking fenderwell exit, not fender exit.
Posted By: 440Jim
Re: A -Body fender exit headers *DELETED* - 12/27/14 04:18 PM
Post deleted by 440Jim
Posted By: 440Jim
Re: A -Body fender exit headers *DELETED* - 12/27/14 04:21 PM
Post deleted by 440Jim
Posted By: 440Jim
Re: A -Body fender exit headers *DELETED* - 12/27/14 04:25 PM
Post deleted by 440Jim
Posted By: 440Jim
Re: A -Body fender exit headers *DELETED* - 12/27/14 04:30 PM
Post deleted by 440Jim
Posted By: 440Jim
Re: A -Body fender exit headers *DELETED* - 12/27/14 04:33 PM
Post deleted by 440Jim
Posted By: 440Jim
Re: A -Body fender exit headers *DELETED* - 12/27/14 04:34 PM
Post deleted by 440Jim
Posted By: 1967dartgt
Re: A -Body fender exit headers - 12/27/14 04:58 PM
Or are you looking for this style
Posted By: 1967dartgt
Re: A -Body fender exit headers - 12/27/14 05:06 PM
I would do them like Guppy if I made a set for my car.
Posted By: 1967dartgt
Re: A -Body fender exit headers - 12/27/14 05:10 PM
Posted By: sdaurity
Re: A -Body fender exit headers - 12/27/14 06:50 PM
My old car is done like gup did his. I have those headers still for a w-8 head stainless 2 1/8- 2.1/4 step but not equal lengths.
Posted By: 1967dartgt
Re: A -Body fender exit headers - 12/27/14 08:07 PM
Quote:
My old car is done like gup did his. I have those headers still for a w-8 head stainless 2 1/8- 2.1/4 step but not equal lengths.
What deck height was that motor?
Posted By: sdaurity
Re: A -Body fender exit headers - 12/27/14 09:38 PM
Quote:Quote:
My old car is done like gup did his. I have those headers still for a w-8 head stainless 2 1/8- 2.1/4 step but not equal lengths.
What deck height was that motor?
9.600 deck. They weren't close to anything they should clear a lower deck motor. Long as everything is cut out like the pics of Adams.
Posted By: 1967dartgt
Re: A -Body fender exit headers - 12/28/14 12:52 AM
Mine is weird it's a tall deck that some one decked .250 out of it. I would just worry about steering column.
Posted By: Rob C
Re: A -Body fender exit headers - 12/28/14 02:10 AM
Somehow I don't think Bob was looking for this type of header, but, I could be wrong!
Posted By: Sport440
Re: A -Body fender exit headers - 12/28/14 02:13 AM
Quote:
Somehow I don't think Bob was looking for this type of header, but, I could be wrong!
and if he was it would be the wrong type of header. That type of header is only okay with a Power adder, not a NA motor with No collector.
Posted By: MR_P_BODY
Re: A -Body fender exit headers - 12/28/14 02:21 AM
Not a real good pic but this is a A body
Posted By: 1967dartgt
Re: A -Body fender exit headers - 12/28/14 02:36 AM
Quote:
Somehow I don't think Bob was looking for this type of header, but, I could be wrong!
So isn't that a fender well header not a fender exit header.
Posted By: bobs69
Re: A -Body fender exit headers - 12/28/14 02:59 AM
Thanks for the pictures. I have fenderwell headers now and they limit my front tire size. I was wanting to try a taller front tire. Just looking at different ideas. Underbody headers for an a body is really expensive. Everytime i get a few bucks saved something else comes up. 
Posted By: dmking
Re: A -Body fender exit headers - 01/02/15 01:33 AM
look for someones pro parts partial fenderwell headers. i have a set on my car with taller tires.
Posted By: GTSDave
Re: A -Body fender exit headers - 01/02/15 03:55 AM
I have ProParts in my 68 Cuda right now with 440-1 heads on a low deck. My engine is also set back a couple of inches and I still have one tube that barely touches with small front tires.
It was such a PIA to get the clutch out I ordered in a set of weld up Headmans and will be spending some of my winter update time fabbing up some new ones.
With a tall deck in the stock location they might fit better, but I HATE having to work on anything near them right now.
-Dave
It was such a PIA to get the clutch out I ordered in a set of weld up Headmans and will be spending some of my winter update time fabbing up some new ones.
With a tall deck in the stock location they might fit better, but I HATE having to work on anything near them right now.
-Dave