What will it run plus tell what needs changed

Okay fellers,time to make some predictions.Only 2 months till launch time.

This will be 1/8th mile only also.

4.500x4.500 572 C.I.D.

callies crank.

6.950 grp rods

Wiseco flat tops

Zero decked blocked with 15.1 compression

572-13 indy 385 cnc heads with titanium valves
and 1.7 rockers

Indy tunnel ram with 2 750 alcohol dominators.

TCI 9 1/2 inch convertor that went to 6000 behind my 528..

Only downfall is i am using the camshaft out of my 528 which was with 1.5 rockers and the specs were

intake lift 700 exhaust lift 715
duration 326 and 356
duration @50 286 and 306
112 degree centerline

This motor will be going in a (i know but its still mopar)1900lb 240" 4 link dragster with a 4.30 gear.

Just curious to see what some guesses are out there.

Thanks for playin.

5-teens, low 20's

i really hope not..My 528 run 4.70s

Definitely in the 4's. Tough to say, but I would guess 4.50 ish .

But what do i know

EDIT: just saw you posted your 528 times

you better think about getting a tighter convertor. it's going to stall alot higher now. should go 4.50s easy

Quote:

---

you better think about getting a tighter convertor. it's going to stall alot higher now. should go 4.50s easy

---

I was thinkin the same thing.Ive gotta another that only went to 4800 behind my 528.May try it first.