Posted By: mac56
Cup style lash adjusters - 10/21/14 10:19 PM
Just wondering how a cup style adjuster oils the pushrod tip with through shaft oiling. Does that cup not act like an umbrella?
those adjusters usually have a hole all of the way through so oil will get in there. i run a pushrod with an oil hole as well and noticed since doing so the ends have less marking.
Posted By: mac56
Re: Cup style lash adjusters - 10/22/14 12:20 PM
I noticed one set of adjusters that had the hole but did not see how the oil would get from the hole in the rocker to the hole in the adjuster.