carb shop

Dale Cubic at CFM. GENIUS!

Prosystems!!!!

Customer support is second to none

Depends on what you need.............but truthfully very few people really NEED a custom carb. Most new carbs are really good, plus have all the bells and whistles if you want to "tinker".

Now, if I WAS picking a builder, my first choice would be Dale Cubic, but there are plenty of good ones. Devane, Braswell, Book, APD, etc

Monte

I agree and have re worked the stock holley blocks and bodies on a few carbs lately and make em tuneable by drilling and tapping ifr`s, emulsion holes etc. You`d be amazed what a difference is there..........fun chit.

Well if ya got the money hard to beat Braswell. But honestly would depend on application. NA, Nitrous deal, Mountain motor, blow through. My answer would be different for all..

FWIW I have had very good luck with Gary Williams in the past. We are working with Braswell on the Predator deal.

Pro Systems

I have 2 carbs (2 different motors) done by Pro Systems and have been very happy w/ both.

APD did my alky carb. It worked flawless right out of the box.