Drop spindles ?

Strange that there's no mention of this in the brake swap article ...

http://www.moparaction.com/Tech/archive/disc-main.html

Maybe it only applies to these aftermarket spindles ????

the HDK kit that Denny Laube sells over on forabodies is offered with drop spindles if you are looking for that. i'm pretty sure his kit uses wildwood mustangII-type 1" or 2" drop spindle or 0" drop. some autocrossers use it, but his kit is real good for drag because it has zero toe change from 10" compressed all the way to 15" fully extended.
(i.e. no bump steer from fully compression to full extension)

those kits are nice, but cost just under $3k

http://www.forabodiesonly.com/mopar/showthread.php?t=259684

you pick whatever spindles you want

Phone # for HDK ? I can't find it

I have 9 in drum spindel that is drilled for the big ball joint . My rotors fits that spindel . Magnum force only makes the drop for a 73-76 that takes a larger bearing in the rotor . Also the 73-76 moves the wheel toward the outside of the body

sent you the contact info. his stuff is a kit, the spindles would not be a stock bolt on in place of your spindles.

that being said, his kit does not move the wheels inward or outward from stock.