Posted By: 7sec.cuda
we might be getting a handle on this Updated - 06/16/14 09:55 PM
after 2 years we are FINALLY going in the right direction
http://youtu.be/UZKJAVFhnjg
http://youtu.be/UZKJAVFhnjg
we might be getting a handle on this Updated
Posted By: BobR
Re: we might be getting a handle on this - 06/16/14 10:06 PM
Quote:
after 2 years we are FINALLY going in the right direction
http://youtu.be/UZKJAVFhnjg
Congrats on a good outing.
Posted By: GY3
Re: we might be getting a handle on this - 06/16/14 10:10 PM
Damn, that's gettin' it done!
Am I right in seeing you're doing this n/a while lot of the other cars in the video are turbo or nitrous cars?!
Am I right in seeing you're doing this n/a while lot of the other cars in the video are turbo or nitrous cars?!
Posted By: 7sec.cuda
Re: we might be getting a handle on this - 06/16/14 10:22 PM
we are the only n/a anywhere around us and being 400#overweight for the class(in a class with nothing but nitrous and turbos) 
Posted By: GY3
Re: we might be getting a handle on this - 06/16/14 10:50 PM
Quote:
we are the only n/a anywhere around us and being 400#overweight for the class(in a class with nothing but nitrous and turbos)
400 lbs. requirement or just happen to be that much over?
Very impressive!
Posted By: 7sec.cuda
Re: we might be getting a handle on this - 06/16/14 11:03 PM
we are allowed to be 2600# by class rules being n/a (impossible to do) 
Posted By: GY3
Re: we might be getting a handle on this - 06/16/14 11:23 PM
Quote:
we are allowed to be 2600# by class rules being n/a (impossible to do)
Seriously, that is an amazing combo!
It must hurt some feelings on the other teams when you do it n/a!
Posted By: Monte_Smith
Re: we might be getting a handle on this - 06/16/14 11:30 PM
Quote:Not impossible.....just have to do a bunch of cutting on that pretty Cuda.......LOL!!!
we are allowed to be 2600# by class rules being n/a (impossible to do)
Nice runs.
Is that class limited to 4.840 motors on the power adder cars. I have a couple customers who run that deal.
Monte
Posted By: johnnycuda
Re: we might be getting a handle on this - 06/16/14 11:40 PM
From one N/A 'Cuda owner to another..You the Man! 
Posted By: Thumperdart
Re: we might be getting a handle on this - 06/16/14 11:58 PM
That was some good racing and although a couple tenths behind, you held your own n/a in a field of power adder cars............. 
Posted By: Airwoofer
Re: we might be getting a handle on this - 06/17/14 12:01 AM
That was a good save at 3:10! Glad he missed the wall.
Posted By: Bigcube
Re: we might be getting a handle on this - 06/17/14 12:11 AM
Quote:
That was a good save at 3:10! Glad he missed the wall.
I was going to ask if you had a change of undies in the pits
Posted By: 7sec.cuda
Re: we might be getting a handle on this - 06/17/14 03:01 AM
thanks guys for all the nice compliments we hold our heads high even thou we know we are out gunned we go out there and give it our best and show them we are not scared...
yes my brother gave us a little bit of excitement on that one pass but handled it like a pro that right lane just would not cooperate with us
monte we run the cecil county dragway rules take a peek on their website all the rules are up
yes my brother gave us a little bit of excitement on that one pass but handled it like a pro that right lane just would not cooperate with us
monte we run the cecil county dragway rules take a peek on their website all the rules are up
Posted By: camastomcat
Re: we might be getting a handle on this - 06/17/14 03:28 AM
Very impressive!
Posted By: hemi-itis
Re: we might be getting a handle on this - 06/17/14 05:50 AM
Well,,,,,,,,,it's about time 
Posted By: bigtimeauto
Re: we might be getting a handle on this - 06/17/14 06:30 AM
Quote:
thanks guys for all the nice compliments we hold our heads high even thou we know we are out gunned we go out there and give it our best and show them we are not scared...
yes my brother gave us a little bit of excitement on that one pass but handled it like a pro that right lane just would not cooperate with us
monte we run the cecil county dragway rules take a peek on their website all the rules are up
cecil canned the class after the first race this year as nobody supported it. Atco will run it this coming weekend
Posted By: jim sciortino
Re: we might be getting a handle on this - 06/17/14 06:40 AM
Excellent job......
I knew it was just a matter of time.
I knew it was just a matter of time.
Posted By: 7sec.cuda
Re: we might be getting a handle on this - 06/17/14 01:05 PM
yes cecil cancelled it (low car count)but all the tracks use the same rules
thanks jim we knew eventually we would figure it out lol
thanks jim we knew eventually we would figure it out lol
Posted By: 7sec.cuda
Re: we might be getting a handle on this - 06/17/14 01:18 PM
Quote:
Well,,,,,,,,,it's about time
its been a LONG and windy road thanks
Posted By: Al_Alguire
Re: we might be getting a handle on this - 06/17/14 05:31 PM
Very nice
Posted By: 572_HEMI_Cuda
Re: we might be getting a handle on this - 06/17/14 05:59 PM
sweet...
Posted By: an8sec70cuda
Re: we might be getting a handle on this - 06/17/14 06:58 PM
Congrats! That's one bad cuda!!!! 
That's one bad cuda!!!!
Posted By: 7sec.cuda
Re: we might be getting a handle on this Updated - 06/23/14 02:23 AM
Went to Atco this weekend and made it to the finals in Big Tire Outlaw with a best of 4.71@149.59 mph 1.11 in 60 3.07 in the 330
Posted By: Bigcube
Re: we might be getting a handle on this Updated - 06/23/14 02:47 AM
Nice! Is that a new best?
Is that a new best?
Posted By: GY3
Re: we might be getting a handle on this Updated - 06/23/14 03:09 AM
Wow!
Posted By: 7sec.cuda
Re: we might be getting a handle on this Updated - 06/23/14 06:59 PM
yes jim thanks that's our best
Posted By: jim sciortino
Re: we might be getting a handle on this Updated - 06/23/14 08:27 PM
Quote:Great job.....
Went to Atco this weekend and made it to the finals in Big Tire Outlaw with a best of [Email]4.71@149.59[/Email] mph 1.11 in 60 3.07 in the 330
That is getting it done, especially N/A at that weight, with so few cubes.
Posted By: mafo
Re: we might be getting a handle on this Updated - 06/23/14 10:11 PM
almost make me consider a Hemi...
Posted By: GY3
Re: we might be getting a handle on this Updated - 06/23/14 10:47 PM
Again, going off memory here, but this is a HEMI 99?
Posted By: Stroker Scamp
Re: we might be getting a handle on this Updated - 06/24/14 07:07 AM
Awesome ride, what do you have to do with maintenance between rounds?
Posted By: charger410
Re: we might be getting a handle on this Updated - 06/24/14 12:27 PM
Great car awesome numbers. Master
awesome numbers. Master
Posted By: 7sec.cuda
Re: we might be getting a handle on this Updated - 06/24/14 05:00 PM
Quote:
Awesome ride, what do you have to do with maintenance between rounds?
thanks our normal maintenance is checking valve lash and spring pressures after every run sometimes we do have to change springs
Posted By: 7sec.cuda
Re: we might be getting a handle on this Updated - 06/24/14 06:18 PM
Quote:
Again, going off memory here, but this is a HEMI 99?
yes its a Larry Morgan built 99 Hemi 550 inches
Posted By: 7sec.cuda
Re: we might be getting a handle on this Updated - 06/24/14 06:19 PM
Quote:Quote:Great job.....
Went to Atco this weekend and made it to the finals in Big Tire Outlaw with a best of [Email]4.71@149.59[/Email] mph 1.11 in 60 3.07 in the 330
That is getting it done, especially N/A at that weight, with so few cubes.
yes jim its like bringing a knife to a gunfight thanks
Posted By: Al_Alguire
Re: we might be getting a handle on this Updated - 06/24/14 09:38 PM
Excellent work!!
Posted By: jim sciortino
Re: we might be getting a handle on this Updated - 06/24/14 10:47 PM
Quote:Get that car down to minimum weight and it will be a case of knife buries gun.Quote:Quote:Great job.....
Went to Atco this weekend and made it to the finals in Big Tire Outlaw with a best of [Email]4.71@149.59[/Email] mph 1.11 in 60 3.07 in the 330
That is getting it done, especially N/A at that weight, with so few cubes.
yes jim its like bringing a knife to a gunfight thanks
Posted By: 7sec.cuda
Re: we might be getting a handle on this Updated - 06/24/14 11:39 PM
Quote:
Excellent work!!
thanks Al coming from you means a lot hopefully we get better from here
Posted By: 7sec.cuda
Re: we might be getting a handle on this Updated - 06/24/14 11:41 PM
Quote:Quote:Get that car down to minimum weight and it will be a case of knife buries gun.Quote:Quote:Great job.....
Went to Atco this weekend and made it to the finals in Big Tire Outlaw with a best of [Email]4.71@149.59[/Email] mph 1.11 in 60 3.07 in the 330
That is getting it done, especially N/A at that weight, with so few cubes.
yes jim its like bringing a knife to a gunfight thanks
trust me jim that's our new mission trying to find unfound weight we are on a mission.........
