Moparts

Which intake???

Posted By: 65 Hemi

Which intake??? - 06/08/14 01:41 AM

I currently have a 68 dart with a 540 indy motor -1 12.1 with about .710 lift. It has run 5.80s 1/8 with 4.10 gears at 3200 with driver. It currently has a 1250 single carb. I am thinking of putting tunnel ram on it with 2 780 Holley progressive linkage carbs or I have a pair of 1400 Book dominators. Which would your buy or keep it the same. All input will help.
Posted By: AndyF

Re: Which intake??? - 06/08/14 02:38 AM

Is your intake ported? If not, you can pick up about 30 hp by having it professionally ported.

Attached picture 8168938-side.jpg
Posted By: 65 Hemi

Re: Which intake??? - 06/08/14 02:58 AM

Quote:

Is your intake ported? If not, you can pick up about 30 hp by having it professionally ported.



It is not completely ported but I am not trying to get every hp out of the combo. I'm not a bracket racer or an et chaser because I have times where my car will sit for months at a time because I get to busy at work. I just like to tinker and have fun.
Posted By: Al_Alguire

Re: Which intake??? - 06/08/14 03:23 AM

One of these
[IMG]http://i222.photobucket.com/albums/dd105/blowncuda/IMAG03231_zps585596ea.jpeg[/IMG]
Posted By: 65 Hemi

Re: Which intake??? - 06/08/14 04:52 AM

Hi Al, I would love to but I don't think it will bolt up unless I change everything from the trans forward. I been dreaming about one since I saw yours when you got it. Plus I'm just a poor Texas boy. I can't afford one of them.
© 2024 Moparts Forums