Rods

I'm putting together a 572. Looking at rods. Looking for pros and cons of aluminum rods and steel rods. This will not be a torbo of a blower motor. Might run a 250 shot of spray as a insurance policey.

I run GRP aluminum in my 572.... Run em 500 passes and toss em and put in a new set..I shift at 6800 also. They key is get the motor good and warm then let it heat soak for a while before the 1st pass of the day and the will give good service..I have a brand new set of GRP pro series rods 6.760 long if interested...Paid $1250 for them will take $750

Crower or Oliver.
R.

Oliver steel rods in my 572" hemi. 850 hp or so on motor plus another 200 (for now) from a plate.

Carillo steel rods with L19 bolts You can't go wrong no matter what power level on gasoline Olivers steel billet are cheaper though

Oliver steel in my 557