Posted By: Forest
My new motor 540 B1, Indy Maxx UPDATED pics motors in - 04/01/14 02:17 AM
All this talk the last couple weeks about low deck builds. Figured I was far enough along with my build to show some pics...
So its a low deck Indy Maxx block 4.5" bore and a Callies 4.25" stroke crank. Callies Ultra h-beams, Diamond custom 14 to 1 pistons. Custom Push rod oil conversion and a 54mm cam core.
IMM built the the short with the oil mods, and set up the Koffels ported B1 Originals.
Should crack 900 HP and move my 2,500 lbs stratus along nicely compared to the small block.
I also converted the car to a glide and took some rear gear out of it. Motor should be in the car this week. I have headers yet to build, so hopefully that goes smooth and I can get to testing!
So its a low deck Indy Maxx block 4.5" bore and a Callies 4.25" stroke crank. Callies Ultra h-beams, Diamond custom 14 to 1 pistons. Custom Push rod oil conversion and a 54mm cam core.
IMM built the the short with the oil mods, and set up the Koffels ported B1 Originals.
Should crack 900 HP and move my 2,500 lbs stratus along nicely compared to the small block.
I also converted the car to a glide and took some rear gear out of it. Motor should be in the car this week. I have headers yet to build, so hopefully that goes smooth and I can get to testing!