Thank you Indy Cylinder Head !!!

Quote:

---

?? Can I have your old engine ??

---

Quote:

---

Want to give a BIG shout out to Josh @ ICH for the fast service on my new Aluminum Max Block...Ordered Feb 7TH and received on March 18TH for a pretty darn fast fill order for a block !!

I ordered direct with no problems and had block shipped to engine builder for final machining & build...Will keep everyone informed how the build goes as it should be 1050hp + with B1 originals & 588" with a cast intake & single carb !!!

THANKS AGAIN !!

---

butt kisser lol

Quote:

---

Quote:

---

?? Can I have your old engine ??

---

??....Can i have your old engine...??

---

Hey some of us still have small blocks!!

Quote:

---

Quote:

---

Here's a pic of a 540" low deck build we just did.

---

any info on this 540low deck

---

Callies Magnum XL 4.250 crank, Callies 6.700 H beams, Custom Diamond B1 pistons, custom IMM solid roller cam, 4.500 bore Indy low deck block, TD 1.7's...fast bracket build. Forest is finishing the build at his home, and I'm sure he'll let us know how it runs in the car.
Heads were done by Scott Koffel (bought the heads off Cab), Manley NexTek springs and Manton pushrods. Will be a single 4 dommy and intake.
A tad over 900HP

Oh and 14.2:1 compression.

Quote:

---

Quote:

---

Quote:

---

Here's a pic of a 540" low deck build we just did.

---

any info on this 540low deck

---

Callies Magnum XL 4.250 crank, Callies 6.700 H beams, Custom Diamond B1 pistons, custom IMM solid roller cam, 4.500 bore Indy low deck block, TD 1.7's...fast bracket build. Forest is finishing the build at his home, and I'm sure he'll let us know how it runs in the car.
Heads were done by Scott Koffel (bought the heads off Cab), Manley NexTek springs and Manton pushrods. Will be a single 4 dommy and intake.
A tad over 900HP

Oh and 14.2:1 compression.

---