Comp Cams Elite Race Roller Lifters

anybody use these? they're asking good coin for these, but they look good & was thinking of buying a set for the off season upgrade.

MRL sells one just as good for a lot less.

I did a fair amount or work with these lifters just as they came out. Nice parts, but there was way too much oil being bled off to the pushrod cup and to the roller. If you send me a PM I can give you the details of what I had to do to control all that oil. Once solved they are brutal pieces.

i'm using a Maxx block so no oil in the lifter galleries. i take it the oiling issue wont be a problem for me.

you got a link to the lifters on MRL you think are better?

http://www.forabodiesonly.com/mopar/showthread.php?t=192303

I have these in my 540 and also in my 416. They can be used with oil thru pushrods if you want.

looks like they need oil from the gallery to feed the roller. i have a Maxx block. no gallery on one side & no holes on the lifter bores on the other.