Posted By: Crizila
Another high tech tool from my scrap metal bin. - 02/24/14 05:06 AM
Magnetic base mount for checking cam / lift.
Quote:
Magnetic base mount for checking cam / lift.
Quote:Probably easier with feeler gauges - although I have never tried it with a dial indicator ( other than my old P&G valve gaper). Just too much wiggle with the stud style rocker mount. My cam card calls for .012" on both in. & ex. I use a .012 and a .014. .012 won't go in = too tight. .014 goes in = too loose. I just use that set up for checking cam condition / lift. Anything within a .010" - .012" range is acceptable.
Could you use that to set valve lash or easier with feeler gauges ?