head gasket suggestions

Posted By: 74DS

head gasket suggestions - 01/14/14 03:37 AM

Hi ! Any suggestions for head gaskets ; 340 .030
stroked to 416 , with edelbrock heads compression about 10.9:1 ?

Thanks in advance !!!

Posted By: MR_P_BODY

Re: head gasket suggestions - 01/14/14 04:08 AM

I have that same set up and I have been using the
Felpro with zero problems
EDIT
Different heads but the same compression

Posted By: BPE

Re: head gasket suggestions - 01/14/14 04:12 AM

Felpro 1008

Rod

Posted By: qwkmopardan

Re: head gasket suggestions - 01/14/14 07:35 AM

Cometic C5622-040. In stock at Summit

Posted By: Cab_Burge

Re: head gasket suggestions - 01/14/14 09:55 AM

Quote:

Felpro 1008

Rod

I have used them on several NHRA legal 340 stocker motors that made over 430 HP, they blueprint out to have 11.4 to 1 compression ratio and still be legal

Posted By: dusturbd340W5

Re: head gasket suggestions - 01/15/14 12:20 AM

Quote:

Quote:

Felpro 1008

Rod

I have used them on several NHRA legal 340 stocker motors that made over 430 HP, they blueprint out to have 11.4 to 1 compression ratio and still be legal

I ran the 1008 at 12.5-1 with no problems at all.