Moparts

K1 Rods

Posted By: 416challenger

K1 Rods - 01/06/14 09:00 PM

I am not sure if this has been posted but K1 is having a blowout sale on Racing Junk. I just picked up a set on K1 small block rods for $286.87 delivered. I think there are a few others than what I posted.

http://www.racingjunk.com/Rods/182087644/New-K1-4340-rods-sb-Chrysler-blowout-sale.html

http://www.racingjunk.com/Rods/182087675/New-Chrysler-BB-Hemi-K1-rods-126.28-set-.html
Posted By: Jwilli500

Re: K1 Rods - 01/06/14 09:07 PM

Great deal! Just make sure it's the pin size you want, some of their Small Block rods have the Chevy .927 piston pin.
Posted By: 416challenger

Re: K1 Rods - 01/06/14 09:11 PM

They were with the .927 pin, but that is what i needed.
Posted By: SNK-EYZ

Re: K1 Rods - 01/06/14 11:02 PM

I got 2 sets of the Hemi rods coming, the first set has been shipped.

There was a thread about the Hemi rods, but it looks like it got deleted.
Posted By: cudaman1969

Re: K1 Rods - 01/06/14 11:58 PM

If any body has an extra set of the Hemi rods and want to sell PM me here on moparts, they where sold out before I knew about them.
Posted By: mr_340

Re: K1 Rods - 01/07/14 04:59 AM

Mike has some listed in the December section. He has them listed on Classracer too. The SB rods and 440 rods I got look pretty nice. I haven't taken mine out of the bags to measure them. I was told when I ordered them that they were being drop shipped. I also noticed that K1 has new part numbers for their rods. I wonder if they changed suppliers and just cleared out the old stock? There were a few Carrillo rods on sale too, just a lot more for a set and limited choices (mostly Cheeby and Phord).
Posted By: SNK-EYZ

Re: K1 Rods - 01/10/14 01:05 AM

My 2nd set of Hemi rods has arrived so now I have both sets.

Hopefully others have gotten theirs at the cheap price after the next batch became available.
Posted By: ogopogo

Re: K1 Rods - 01/10/14 02:14 AM

I called K1 first thing monday morning (early)to get some and they were all gone? Nobody mentioned a second batch?
Posted By: hemi-hunter

Re: K1 Rods - 01/10/14 06:13 AM

they have a second batch that they have to finish hone the small end but the back orders exceed the amount. looks like there all gone glad I got some for the $126 while they still had them
Posted By: SNK-EYZ

Re: K1 Rods - 01/10/14 10:47 AM

If you check ebay there's a vendor that has the K1 Hemi rods on there with a no reserve auction and they're at $150 for the set (only one bid now).

He had them at $399 a set before.

I'd post a link to the auction, but it would probably get my post deleted.
If that doesn't happen anyway because I said ebay in it.
Posted By: HEMIFRED

Re: K1 Rods - 01/10/14 11:05 PM

Mike Roth has some for sale
© 2024 Moparts Forums