904 governor ?

I want to plug the feed hole to the governor. Saw it posted before, can't find it. Anyone do this? I have my vent in the tail hsg close to the gasket. There are 2 holes in the gov, 1 has a screen in it & the other looks like a return. Which 1 gets plugged. Thanks 4 ur time. Merry Christmas everyone.

Go on the CRT web site.its there ,I used it also

Thank u sir, i'll check it out.

Your Welcome

tap 10-32 install set screw. use both sealing rings on the park gear.

Just did mine over the holiday weekend as I was loosing fluid out the rear vent on my 727. I carefully tack welded the indicated hole shut then filed smooth. Hopefully does the trick but, also gonna install a small vented catch can for good measure. Also, thanks CRT for the tech page on your website. Sorry for the minor hijack...

Thanks John for making it a tech item. I just tapped the hole & plugged it.