Posted By: sc301v
Mega block torque sequence - 12/19/08 09:58 PM
What's the sequence.Do you do all the mains then the side bolts?And what do you torque the side bolts to with arp moly lube?
Mega block torque sequence
Posted By: bonefish
Re: Mega block torque sequence - 12/20/08 12:55 AM
good ? 
Posted By: Jacob Pitt
Re: Mega block torque sequence - 12/20/08 01:09 AM
Get the side bolts started, and then torque all the main caps first. I torqued the side bolts to 35ft/lbs I believe.
Posted By: PETE@BESTMACHINE
Re: Mega block torque sequence - 12/20/08 02:56 PM
We snug all fasteners frist,with stock main bolts 95 with 30w oil and side bolts 45 with 30w oil.Hope this helps.
Posted By: sc301v
Re: Mega block torque sequence - 12/20/08 03:57 PM
I have studs..Forgot to mention that.
Posted By: Cab_Burge
Re: Mega block torque sequence - 12/20/08 07:35 PM
Quote:Use the sequence and torque specs that came with the studs or call the stud manufacturer to get them, make sure on the lube to use with the torque numbers also
I have studs..Forgot to mention that.
. I do as already said on the side bolts, snug slightly all of them and then torque the main bolts first snf the side bolts on that cap, move to the next one. Do the thrust(center) main last after checking and setting the crankshaft play end 