Posted By: Anonymous
what will it run - 12/19/08 04:51 PM
finally building the stroker this winter it will be 435 with 13.5to 1 comp. gas ported pistons roller cam around 274/277 duration Indy intake 1050 dominator 8in. 5100 conv. 457 gear 30x11.5 slick ladder bar 2985lb. the car with a 11 to 1 .030 over 340 ran a best 10.6 what is your guess on et., 60ft, mph.
Posted By: MR_P_BODY
Re: what will it run - 12/19/08 05:01 PM
I'm thinking a 9.95 at 134 if you can hook up with
a 1.30 60'
Posted By: Anonymous
Re: what will it run - 12/19/08 05:04 PM
thanks for the reply Mr. P I am hoping for a little better than that but I may be unrealistic
Posted By: dizuster
Re: what will it run - 12/19/08 05:06 PM
Assuming w2's by your sig' name?
Depends how good the heads are...
Posted By: Thumperdart
Re: what will it run - 12/19/08 05:10 PM
Probably faster than me.....
Posted By: Anonymous
Re: what will it run - 12/19/08 05:16 PM
I forgot they are ported W2s thanks for the replies
Posted By: Anonymous
Re: what will it run - 12/19/08 05:36 PM
no I do not know any flow no. Mr. P thanks
Posted By: B3422W5
Re: what will it run - 12/19/08 06:54 PM
If the heads are good, at that weight probably low 9.70's at 136 ish
Posted By: RyanJ
Re: what will it run - 12/19/08 07:58 PM
Hmm this combo sounds awfully familiar......
The quality of the heads will dictate the ET.....
Posted By: Anonymous
Re: what will it run - 12/20/08 02:38 AM
thanks for the replies did you receive a cam to regrind yet Ryan talk to you later