Need safety harness mounting pics, care to share?

I am looking at several different 5 point harnesses to go into my 67 barracuda, and I figured the racer forum may yield the best results for this question.

I want to attach my shoulder belts to the horizontal roll cage bar behind the drivers seat in a loop fashion.

Do you guys have any pics of your mounting locations on your A-body cars for the shoulder and lap belts??????

Also any recommendations in harnesses?

Thanks.

I dont have a A body but this is the company that
I like, they will rebuild their harness for $49,
I like the 1/4 turn lock
http://www.rjsracing.com/5point.html

Also not an A-body, but this is how mine are mounted.



Lap belts are bolted to stock belt location.
Crotch belt goes through hole in seat and bolts to the floor rearward of the role in the seat.

Thanks Bob,

Great looking car by the way!!!!!

Do the shoulder belts require some sort of divider between the straps where they loop around the bar behind the seat to keep them from shifting side to side?

My shoulder belts are mounted using one tab. My lap belts are mounted in the stock location. My crotch (he said crotch) belt is mounted under the rear portion of the seat as per NHRA.
DC

Quote:

---

Thanks Bob,

Great looking car by the way!!!!!

Do the shoulder belts require some sort of divider between the straps where they loop around the bar behind the seat to keep them from shifting side to side?

---

Don't know if it is required, but my seat support bars do serve that purpose.